Showing 1–16 of 41 results

12-Volt Speed Controller

John Blue Company is excited to introduce our upgraded 12-Volt Speed Controller. We have taken our customers’ ideas and incorporated them into our new design. Accurate and smooth control over a wide range of RPM’s, stand-alone gauge option, easily readable digital display, better wiring connectors, standard run/hold on 35 amp units plus much more. We consolidated greater amp capacity through better design, all at a competitive price. The 12-Volt Controller coupled with the John Blue 12-Volt Pump is ideal for low volume fertilizer applications.

The John Blue 12-Volt Controller is available in 15 and 35 amp models. A stainless steel ammonia pressure gauge is available as an option with or without a plumbing kit. The 35 amp is also available with a digital display, which keeps pressurized fertilizers or chemicals out of the cab of the tractor. The remote stainless steel sensor has a 1/4″ NPT male fitting and uses a 20 foot wiring harness. The 35 amp control comes standard with run/ hold feature, which can be wired to your implement lift switch using a whisker or proximity switch.

1770NT John Deere Port Manifold Conversion Kit

John Blue Company has developed the following kits to make it easier to use John Blue products on your John Deere Planter.

  • Converts the 1770NT John Deere Port Manifold System to the newly redesigned FD-1210 and FD-2010 John Blue Flow Divider.
  • For planters built 2012 and later.

 

Delivery Line Check Valves for Planters & Applicators

Check Valves with Push Connect Fittings

For Planter & Applicator Delivery Lines

John Blue offers delivery line check valves for your planter and applicators – now available with Push Connect Fittings. Our check valves are easier to service and clean in the field. Stop your delivery lines from draining and put your fertilizer where the plants need it the most.

Direct Hydraulic Drive Piston Pump

  • Lower cost and more compact solution for variable rate piston pump drives.
  • Users can supply their own SAE A 2-bolt motor or hydraulic motor/PWM manifold kits are available from John Blue Company. We offer a flow-thru hydraulic motor/PWM manifold kit (116205-91) and a dead-head style hydraulic motor/PWM manifold kit (116205-91D).
  • A piston pump allows for quick and stable adjustment to application rates within millisecond.
  • With a piston pump your application rates won’t change with the temperature.

Flow Divider Adjustable Spring Kit

  • Adjustable spring kit will enable you to balance multiple flow dividers.
  • Kit may be purchased separately or pre-installed on any size flow divider.
  • Call sales department for adapting to existing flow dividers.
  • When using multiple flow dividers the same size flow dividers must be used, the number of plugged outlets should be identical and the plugs equally spaced. The maximum recommended differential between flow dividers is two plugged ports.
  • Upgrade existing flow dividers (see accessories).

Flow Dividers FD-0610, FD-1210 & FD-2010

Liquid Metering Perfection

Liquid fertilizer users demand accurate rates. The patented John Blue Flow Divider when used in conjunction with our liquid metering piston pump is guaranteed to deliver. After extensive research, we know that the FD-1210, FD-2010 and the newly released FD-0610 accurately divide liquid products across a wide range of application rates. We have proven in the field that it is the most accurate distribution of any automatic flow divider system on the market today. The FD-0610, FD-1210 and FD-2010 provide unsurpassed accuracy with application rates as low as 5 GPA and as high as 80 GPA on 30 inch row spacing at 5 MPH.

Foam Marker FM-10 ATV

Accurate & Dependable Foam Markers for Farming and Turf/Golf Applications

Our foam markers are a simple, reliable solution to visually mark the edge of your sprayed area through deposits of foam balls. It’s the most common and economical way to avoid double coverage or lack of coverage during application of chemicals and fertilizers. The John Blue Foam Markers are easy to install and operate. The system creates a highly visible foam line in the field that correctly marks your position. Mixing water with an inert foaming concentrate liquid in a 1.5 to 3 percent solution creates the foam and is both environmentally friendly while economical.

Foam is generated at the end of the boom. This eliminates the foam breaking down in the boom as well as decreasing the waiting period for the foam to travel to the end of the boom. This makes changing sides more efficient.

All John Blue Foam Marker Kits consist of a 12-volt compressor, a solution tank, control box and parts necessary for installation on any type of spraying equipment or whenever precision applications are needed.

Foam Marker FM-10 WB

(walk behind)

Accurate & Dependable Foam Markers for Farming and Turf/Golf Applications

Our foam markers are a simple, reliable solution to visually mark the edge of your sprayed area through deposits of foam balls. It’s the most common and economical way to avoid double coverage or lack of coverage during application of chemicals and fertilizers. The John Blue Foam Markers are easy to install and operate. The system creates a highly visible foam line in the field that correctly marks your position. Mixing water with an inert foaming concentrate liquid in a 1.5 to 3 percent solution creates the foam and is both environmentally friendly while economical.

Foam is generated at the end of the boom. This eliminates the foam breaking down in the boom as well as decreasing the waiting period for the foam to travel to the end of the boom. This makes changing sides more efficient.

All John Blue Foam Marker Kits consist of a 12-volt compressor, a solution tank, control box and parts necessary for installation on any type of spraying equipment or whenever precision applications are needed.

Foam Marker FM-150

Accurate & Dependable Foam Markers for Farming and Turf/Golf Applications

Our foam markers are a simple, reliable solution to visually mark the edge of your sprayed area through deposits of foam balls. It’s the most common and economical way to avoid double coverage or lack of coverage during application of chemicals and fertilizers. The John Blue Foam Markers are easy to install and operate. The system creates a highly visible foam line in the field that correctly marks your position. Mixing water with an inert foaming concentrate liquid in a 1.5 to 3 percent solution creates the foam and is both environmentally friendly while economical.

Foam is generated at the end of the boom. This eliminates the foam breaking down in the boom as well as decreasing the waiting period for the foam to travel to the end of the boom. This makes changing sides more efficient.

All John Blue Foam Marker Kits consist of a 12-volt compressor, a solution tank, control box and parts necessary for installation on any type of spraying equipment or whenever precision applications are needed.

Foam Marker FM-40

Accurate & Dependable Foam Markers for Farming and Turf/Golf Applications

Our foam markers are a simple, reliable solution to visually mark the edge of your sprayed area through deposits of foam balls. It’s the most common and economical way to avoid double coverage or lack of coverage during application of chemicals and fertilizers. The John Blue Foam Markers are easy to install and operate. The system creates a highly visible foam line in the field that correctly marks your position. Mixing water with an inert foaming concentrate liquid in a 1.5 to 3 percent solution creates the foam and is both environmentally friendly while economical.

Foam is generated at the end of the boom. This eliminates the foam breaking down in the boom as well as decreasing the waiting period for the foam to travel to the end of the boom. This makes changing sides more efficient.

All John Blue Foam Marker Kits consist of a 12-volt compressor, a solution tank, control box and parts necessary for installation on any type of spraying equipment or whenever precision applications are needed.

Foam Marker FM-40-1

  • FM-40-1 Golf/Turf Marker has 15 ft. of liquid and air tubing (for center discharge).
  • Air tube: 1/4″ diameter.
  • Liquid tube: 1/4″ diameter.
  • 15 ft. of cable to connect the remote switch to the compressor is supplied.
  • 6 ft. of power cable connects remote switch to power supply.

Foam Marker FM-64

  • Compressor is mounted separately from the tank.
  • 82 ft. of liquid and air tubing.
  • Air tube: 1/4″ diameter.
  • Liquid tube: 1/4″ diameter.
  • 15 ft. of cable to connect the remote switch to the compressor is supplied.
  • 6 ft. of power cable connects remote switch to power supply.

Ground Drives, Pump Drives and Components

John Blue Company ground drives make the installation of ground driven pumps on applicators and planters simple. Ground driven pumps have proven they are the most reliable and accurate method of applying liquid fertilizer without exception. Now you can bolt it up quickly and easily!

Impellicone Flow Dividers and Splitters

The John Blue Impellicone is a flow divider designed for agricultural Anhydrous Ammonia (NH3) application. It distributes NH3 to multiple rows across an applicator with the accuracy and flexibility you have come to expect from John Blue Products. Impellicone’s name comes from the unique shaped needle, which spins and mixes the liquid and gas phases distributing them evenly to the number of outlets you need. The John Blue Impellicone can be used for all NH3 applications at normal rates, while also offering the flexibility to plug unused outlets without sacrificing accuracy. The Impellicone’s superior accuracy allows better control of targeted rates greatly reducing the over-application of NH3. This will result in less nitrogen leaching, lower crop yield variability and ultimately lowering overall application costs.

L-4001 Strainer

In-Line Strainers & Components

Liquids Kept Free of Foreign Matter

In-Line Strainer Features:

  • In-line strainers clean foreign materials and large particles from pesticides and fertilizer solutions to ensure good distribution whether spraying or applying below the surface.
  • Heavy duty cast iron body and stainless steel screens means a long life.
  • Provides a well-mixed solution, clear of clogging particles and debris.